top of page
Search
EQ – Different Frequency Bands [20 Hz – 20 kHz]
Learning what different frequencies sound like and the effect they have on the sound of different instruments is an invaluable skill. These are the names we use to classify the bands – the frequencies are approximate, so use your ears! > 20 – 60 Hz – Sub-Bass: Gives boom, depth, and richness – too much … Continue reading “EQ – Different Frequency Bands [20 Hz – 20 kHz]”
Timothy Wheeler
Jul 18, 20223 min read


The Different EQ bands and What they mean (part 2)
Dyn3 7-band EQ (Avid Pro Tools free plugin) If you look toward the bottom of the EQ pictured above, you will notice 5 different bands: 1. LF, low frequency, red; 2. LMF, low-mid frequency, orange; 3. MF, mid frequency, yellow; 4. HMF, high-mid frequency, green; 5. HF, high frequency, blue. In today’s blog I will … Continue reading “The Different EQ bands and What they mean (part 2)”
Timothy Wheeler
Jul 5, 20212 min read


The Different EQ bands and What they mean
Introduction to an EQ
Timothy Wheeler
Dec 4, 20203 min read
EQ Overview and Introduction
How to use an EQ
Timothy Wheeler
Nov 29, 20204 min read
Compression Dos & Don’ts
To wrap things up regarding compressors, I will offer 3 Dos and Don’ts as my final word for now. These are things to always keep in mind when working with compressors. Some may have been previously stated in an earlier blog post. DO Avoid using extreme settings to begin with, if … Continue reading “Compression Dos & Don’ts”
Timothy Wheeler
Nov 23, 20201 min read
Compressors – What is the Knee and What does it do?
What does the knee do on a compressor?
Timothy Wheeler
Nov 12, 20201 min read
Compressors 201 – Threshold
A compressor has a lot of knobs and settings. They can be confusing at first. In this blog I am going to talk about one of those knobs – Threshold. A compressor is an automatic volume control. We try to make the signal somewhat the same, static. Without a compressor, we would have to do … Continue reading “Compressors 201 – Threshold”
Timothy Wheeler
Oct 20, 20202 min read


Compressors 103 – Going deeper
Today I’m going to go a little deeper into how compressors work. But first, I want you to do an experiment. This experiment will allow you to SEE what a compressor does. When I did this, things started to become a lot clearer for me. We have to listen differently when it comes to compressors. … Continue reading “Compressors 103 – Going deeper”
Timothy Wheeler
Oct 13, 20203 min read
Organize, Organize, Organize! (Sessions, Folders, Files)
Yes, more organization! 🙂 I think I have always been somewhat organized. But I have learned to be very organized since starting my studio. Things can get very unorganized, confusing and messy very quickly. If you want to save yourself some headaches down the road, grab 20-30 mins to take some time when you’re not … Continue reading “Organize, Organize, Organize! (Sessions, Folders, Files)”
Timothy Wheeler
Oct 13, 20202 min read
bottom of page
